Casters

The casters arrive from McMaster-Carr! I'm really excited.

And, also, I'm pretty darn pleased with McMaster-Carr as a vendor of neat stuff. I had read about them last week in a message on one of the Woodnet forums, where a guy was complaining that he couldn't order from Grainger without a business account. Someone replied that he should try McMaster-Carr, who let you order by credit card. So out of curiosity I checked out their web site. Way cool stuff.

I'm dying to put the casters on when we get home from work, but first I have to drive to Alexandria VW to pick up our registration that's finally arrived. I leave around 6:20 p.m., figuring that traffic is going to suck suck suck and that it's going to take like an hour to get there. But traffic's fine, a little slow maybe but nothing like the parking lot I was expecting.

I get there about 6:45, in time to stop by the parts counter to ask about replacement windshield wipers. The guy says that front ones are $18.00 and the back on is $12.00. He says I should check their website for a coupon, so I leave without buying any yet.

When I get home I finally get to put the casters on the saw stand, and they don't really work. The casters attach to the little rubber feet of the stand, and the feet bend and pull off when perched atop the casters. I try using a wooden shim between each caster and rubber foot, but that works only marginally better, which is to say still not good enough. My next option is to try a full board between the stand and the casters. I'm worried about raising the saw too high, but I figure I'll try like 1/4" plywood, which isn't appreciably higher than the 2" casters are going to be anyway. And the board will serve as a handy shelf too.